中文
English
Home > Products > RFID Series> RFID Passive Tag > UHF RFID Headlamp Tag | 3–17 m Battery-Free for Driveways and Car Parks

UHF RFID Headlamp Tag | 3–17 m Battery-Free for Driveways and Car Parks

Model:
W-600

This UHF RFID headlamp label goes on a car's headlamp cover for automatic gate opening at residential driveways, factory gates and car parks. Metallic heat-control film on a windshield blocks the signal, and putting the tag on the headlamp avoids that problem. The car is recognized as it approaches the barrier, the gate opens, and the system logs which car came or went and when, with no stopping for a card.

With a read range of about 3–17 m, identification is done before the car reaches the barrier, so lanes do not back up. The tag needs no battery; it runs on the reader's radio energy and needs no upkeep once applied. Its slim 97×15mm shape suits narrow surfaces such as lamp covers, and it works from -25 to +85°C through sun and rain. It is single-use: peeling it off destroys it, so it cannot be moved to another car.

The car is recognised before it reaches the barrier: the reader picks up the tag on the headlamp, opens the gate and logs which vehicle came in and when, so residents and staff never hunt for a card and guards stop writing down plates.

Where it is used

Residential driveways

Tag each household car and the barrier opens as it arrives; when someone moves out or changes cars, just delete that tag from the list.

Factory and campus gates

Register staff and contractor vehicles on their own lists and keep entry times automatically, while visitors still sign in at the guardhouse.

Car parks and fleets

Monthly parkers, company cars and delivery fleets are logged on return, so you can see at once who is on site and who is still out.

Glassware and non-metal stock

Stick it on glassware or non-metal items and batch-count them with a handheld for quick stock in and out.

Features

  • Reads through tinted windscreens
    Metallised tint film blocks windscreen tags; the headlamp position avoids it.
  • No battery
    Powered by the reader’s radio waves, with nothing to replace or maintain.
  • Read from a distance
    The car is identified before it stops at the barrier, so the lane does not queue.
  • Weatherproof
    Lasts on headlamps exposed to sun and rain.
  • One car, one code
    Single-use adhesive: once removed it no longer works and cannot move to another car.

How to use it

  1. 1Clean the headlamp and stick the tag on a flat area of the outer lens.
  2. 2Register the tag against the plate number and resident or employee in the management system.
  3. 3Install the reader beside the barrier and wire it to the barrier controller.
  4. 4Drive through once to confirm the gate opens and the entry is logged.

How to choose

Choose by what you identify and the condition of the vehicles:

Community or factory vehicle access, tinted windows
This headlamp tag
Windscreens without metallised tint
Tamper-break windscreen tag fixed inside the glass
Fixing to metal bodywork or steel items
On-metal tag
Staff access as well as vehicles
Add staff access cards
Recognise plates with no tags to issue
Licence plate recognition camera

Tell us how many lanes you have, daily traffic and how many cars to register, or send us a photo of the lane, and we will quote the reader, barrier connection and tags together.

FAQ

Q:Does it need a battery?

No. The reader’s radio waves power the tag, and it needs no maintenance once fitted.

Q:What goes on metal surfaces?

Use an on-metal tag on metal bodywork or steel items; this one is for headlamps, glass and non-metal surfaces.

Q:What if a resident changes cars?

Issue a new tag for the new car and update the plate in the system; the old single-use tag stops working once peeled off.

Q:Headlamp tag or windscreen tag?

Tinted windscreens with metal film need the headlamp tag; without film either works, and the windscreen tag sits inside the car out of the sun.

Q:Do I need a new barrier?

No. The reader connects to the open input of the existing barrier controller.

Q:Where should it not be used?

It is for general use; do not use it for medical, aviation, traffic-signal or other life-safety equipment.

▼ Specifications, product views and downloads follow below

UHF 902–928MHz PASSIVE RFID TAG
UHF RFID Passive Headlamp Tag | 902–928MHz, 97×15mm

W-600 is a 902–928MHz UHF RFID passive tag: battery-free, 3–17m read range and long-distance batch identification. Its slim 97×15mm format suits lamps, glass and other non-metallic surfaces, and its weather-resistant build works outdoors.

902–928Frequency (MHz)
3–17mRead distance
97×15Tag size (mm)
−25–85℃Operating temperature
W-600 UHF RFID passive tag 902–928MHz 97×15mm dimension drawing

W-600 Advantages

3–17m read range

UHF 902–928MHz for long-distance batch reading with a UHF RFID reader, no line-of-sight scanning one by one.

Passive, battery-free

Powered by the reader field: no battery, no maintenance, long service life once applied.

Lamp label format

Slim 97×15mm shape designed for lamps and other curved or narrow surfaces.

For glass and non-metal

Works on glass and non-metallic surfaces, giving flexible tagging for assets and goods.

Outdoor weather resistance

Weather-resistant with −25 to +85℃ operating temperature for stable outdoor reading.

Disposable use

Single-use once applied, suited to one-item-one-ID identification.

System Architecture & Deployment

RFID IDENTIFICATIONThe W-600 UHF passive tag is read by an antenna and reader, and the data goes to a management system for inventory and tracking.3–17mRFLANTHIS PRODUCTW-600UHF passive tagANTRFID antenna902–928MHzREADERUHF readerreads EPCSYSTEMManagement systeminventory · trackingRFID IDENTIFICATIONLEGENDTHIS PRODUCTRF READWIRED

Deployment steps

  1. Choose the mounting spot: lamp, glass or non-metallic surface, away from metal backing.
  2. Pair a reader and antenna: use a 902–928MHz UHF RFID reader (fixed or handheld).
  3. Test read range on site: confirm the 3–17m range with your actual items and mounting angle.
  4. Integrate: import tag IDs into your management system for inventory, tracking or access workflows.

W-600 Specifications

W-600 UHF RFID passive tag 902–928MHz specifications
RF
Tag typeUHF RFID passive tag
Frequency902–928MHz
Read distance3–17m
Mechanical & Environment
Label typeLamp label
Size97 × 15 mm
SurfaceNon-metallic, glass
UsageDisposable use
EnvironmentOutdoor weather resistant
Operating temperature−25 – +85℃

Compare UHF RFID Tags in This Series

W-600 and sibling 902–928MHz passive tags
ModelLabel typeRead distanceSizeOperating temp.
W-600Lamp label3–17m97 × 15 mm−25 – +85℃
W-9320Lamp label (black adhesive)1–15m93 × 20 mm−25 – +85℃
W-9508Car light label (transparent PET)1–16m95 × 8 × 1 mm−25 – +85℃
W-10050Fragile glass label3–17m100 × 50 mm−25 – +85℃

All models above are 902–928MHz disposable passive tags. See more in RFID Passive Tags.

FAQ

What is the read range of W-600?
The rated read distance is 3–17m. Actual range depends on reader power, antenna gain, mounting surface and angle; we recommend testing with your real items.
Can W-600 be mounted on metal?
W-600 is intended for non-metallic and glass surfaces. Metal affects reading; for metal surfaces please contact sales for a suitable model.
Does W-600 need a battery?
No. W-600 is a passive tag powered by the reader's RF field, so it is battery-free and maintenance-free.
Can it be used outdoors?
Yes. W-600 is weather resistant with an operating temperature of −25 to +85℃.
How does W-600 differ from W-9320?
W-600 measures 97×15mm with a 3–17m read range; W-9320 is a black-adhesive lamp label measuring 93×20mm with a 1–15m read range.
Is the tag reusable? Can it be customized?
W-600 is a disposable tag. Volume orders can be customized to your requirements; contact us with quantity and application details.

Choose the right UHF RFID tag

Samples, read-range test advice and reader pairing available.

Contact Sales

Key specifications at a glance

ModelW-600
Frequency902~928
ApplicationUsed for non-metallic, glass, and outdoor weather resistance. UHF RFID The tag utilizes wireless radio frequency to achieve long-distance and batch identification.
Size97*15mm
Product categoryUHF Tag Selector - Smart Classification

Compare UHF Tag Selector - Smart Classification models

W-600 UHF RFID Passive Tag | 902–928MHz Lamp Label 97×15mm and other models in the same WENSHING category — select a model to see its full details.

ProductModelFrequencyApplication
W-600 UHF RFID Passive Tag | 902–928MHz Lamp Label 97×15mmW-600902~928Used for non-metallic, glass, and outdoor weather resistance. UHF RFID The tag utilizes wireless radio frequency to achieve long-distance and batch identification.
W‑3D OMNIW‑3D OMNI902~928Used for non-metallic materials.The application scope of UHF RFID tags is extremely broad, ranging from rapid inventory counting and outbound management in warehousing logistics to contactless checkout and inventory tracking in the retail industry
W-9508 RFID Passive TagW-9508902~928For non-metallic, glass, and outdoor weather-resistant applications. UHF RFID tags achieve contactless identification via radio waves, featuring long-range and multi-target reading capabilities.
W-7218 RFID Passive TagW-7218902~928Used for non-metallic materials. UHF RFID Tags achieve non-contact recognition through radio waves, with the advantages of remote reading and batch processing.
W-0773 RFID Passive TagW-0773902~928Used for non-metallic materials. RFID The sticker label adopts high sensitivity UHF Chips and printable materials can be easily adhered to the surface of cardboard boxes, packaging bags, or logistics outer boxes
W-0765 RFID Passive TagW-0765902~928Used for non-metallic materials.Attach RFID electronic tags to barcode labels and attach them to the packaging trays of each project. In the tag, there are detailed information about the project, storage location, etc.
W-9654 RFID Passive TagW-9654902~928Used for non-metallic materials.UHF RFID tags are widely used in modern logistics, retail, and supply chain management due to their long-distance and large-scale reading characteristics, achieving efficient tracking of goods from warehouses to sales ends.
W-F54 RFID Passive TagW-F54902~928Used for non-metallic materials.UHF RFID tags are widely used in logistics, retail, manufacturing, and other fields to achieve product tracking, inventory management, and asset positioning.
W-RAB RFID Passive TagW-RAB902~928Used for non-metallic materials.UHF RFID tags are widely used in logistics warehousing management, retail inventory counting, and supply chain visualization due to their long-distance and fast batch identification characteristics.

Need help choosing? browse all UHF Tag Selector - Smart Classification products or contact our engineers for specifications, samples or a quotation.