中文
English
Home > Products > RFID Series> RFID Passive Tag > UHF RFID Ceramic On-Metal Tag, 25x9 mm, 3 m Range | Tool Cart Checks for Wrenches and Sockets

UHF RFID Ceramic On-Metal Tag, 25x9 mm, 3 m Range | Tool Cart Checks for Wrenches and Sockets

Model:
W-2509

This 25×9mm ceramic on-metal UHF RFID tag reads reliably even when stuck directly on metal tools such as wrenches and sockets. It is built for tool-cart checks in aerospace maintenance and factories. At the end of a shift, one read of the cart shows how many tools are on board and exactly which one is missing, so nothing gets left inside a machine or an aircraft.

Read range is about 0.2–3 m, which suits reading a whole cart or reading up close, not long-range reading at doorways or from forklifts. The narrow strip works best laid along a wrench handle or other slim metal part; if the handle is curved, mill a flat or shallow groove first. When a tool is retired, the tag can be removed and moved to the next one. It works at 902–928MHz from -25 to +85°C.

1) Anti metal ceramic label

2) Reusable

3) Reading distance: 0.2~3 m

4) Working temperature (℃): -25~+85

5) Frequency (MHz): 902~928

6) Size: 25 * 9 * 3 mm



UHF RFID Ceramic On-Metal Tag, 902–928 MHz: 0.2–3 m read range, 25 × 9 × 3 mm, -25 to +85 °C operating temperature, reusable. A small ceramic on-metal tag for tool cart checks: put one on every wrench and socket, read the cart once at the end of the shift, and you see how many tools are there and which one is missing, so nothing is left inside a machine or an aircraft. It reads even when stuck straight onto metal; run it along the wrench handle or a slim metal part.

  • tool cart check
  • wrench tracking tag
  • aerospace tool control
  • wrench RFID tag
  • drill pipe RFID tag
  • narrow ceramic RFID tag
25 × 9 × 3 mmSize
approx. 0.2–3 mRead range, depends on reader and mounting surface
-25 to +85 °COperating temperature
902–928 MHzUHF band
Anti metal ceramic labelCan be mounted on metal
ReusableCan be moved to the next item
Credit card54 × 85.6 mm25 mm9 mm
Drawn to the same scale: this tag next to a credit card (sizes in mm)

Where the UHF RFID Ceramic On-Metal Tag is used

Best on narrow metal faces of laptops, servers and instruments for close-range asset audits.

W-2509 IT assets: laptop audits

IT assets: laptop audits

The slim 25×9 mm tag sits under a laptop's metal body; during audits a close handheld scan matches the custodian and asset number.

W-2509 Servers: blades and drive trays

Servers: blades and drive trays

The narrow shape fits a server handle or drive tray edge; scanning at service confirms which unit was pulled or put back.

W-2509 Test instruments: calibration cycle

Test instruments: calibration cycle

Placed on the side of an instrument's metal case; the metrology room scans it to bring up the ID and next calibration date.

W-2509 Industrial: metal component tracking

Industrial: metal component tracking

Attached with double-sided tape to metal components; staff scan up close on the line or in stock to track location and lot.

Not suitable: With 0.2~3 m range it is not for portal or forklift long-range reads, nor above 85°C.

In practice: counting and checking presence

  • Here or not

    End-of-shift check: are all the wrenches and sockets back on the tool cart?

    With this tag: read the whole cart once with the tool cart reader. The one on the list that was not read is the one not back on the cart.

  • Count

    How many tools are on this tool cart right now?

    With this tag: read the whole cart once; the number read is listed directly, no counting one by one.

  • Here or not

    Has the socket that was lent out come back?

    With this tag: read with a handheld at check-out and return. A socket with no return record is still out.

  • Count

    At the drill site, how many drill pipe joints are there before going downhole?

    With this tag: read each tag recessed in the groove one by one; the number read adds up directly.Trial-fit on a real joint first

Is this the right one? Compare it with other ceramic on-metal tags

All 4 models are drawn to the same scale; read-range bars run from 0 to 3 m.

W-2509

This page
Size
25 × 9 × 3 mm
Read range
0.2–3m
Temp.
-25 to +85 °C

Common uses: Aerospace and MRO: wrench / socket handles, Drilling: recessed in drill pipe joints, Slim metal parts

25 × 9
Size
9 × 25 mm
Read range
2–3m
Temp.
-25 to +150 °C

Common uses: Auto paint shops: automatic skid ID, Heat treatment plants: fixtures, Foundries: basket batch traceability

Ø 16
Size
16(diameter)15 × 3 mm
Read range
0.1–1m
Temp.
-25 to +85 °C

Common uses: Mold shops: recessed in mold bases, Armories: hidden inside the firearm body, Metal parts with a drilled round recess

25 × 25
Size
25 × 25 × 3 mm
Read range
0.2–3m
Temp.
-25 to +85 °C

Common uses: Injection molders and mold shops: mold / mold base ID, CNC machine shops: fixture control, Mid-size hand tools

Which uses fit? Use guide

W-2509: 25 × 9 × 3 mm, read range 0.2–3m, -25 to +85 °C.

  • Wrench and socket handles

    Best choice

    Aerospace MRO

    Stick along the long side of the handle; count the whole cart

  • End-of-shift tool cart check

    Best choice

    Aerospace manufacturers

    Batch read by the reader on the tool cart

  • Drill pipe joint grooves

    Suitable

    Drilling operations

    Recessed in the groove, hard to knock off

  • Slim shaft parts

    Suitable

    Factories

    9 mm wide, does not stick out past the diameter

  • Reading a whole tool cabinet from a distance

    Not suitable

    Tool rooms

    Range about 0.2~3 m; for long range choose W-1002

  • Tools with plastic handles

    Not suitable

    General

    No metal surface, so it will not read; choose the standard tag W-9610

How to mount it for reliable reads

W-2509 mounting steps
  1. Apply along the long axis of the metal part so the whole ceramic piece lies in one plane.

  2. If the handle is curved, mill a flat or a shallow slot first, so that it does not touch only at the two ends.

  3. When embedding, make the slot 0.5 mm larger than the label and seal flush with resin, so the tool does not snag in the cart.

  4. Avoid the working end, which is clamped or struck.

Can't read it? Three common reasons

  • On a curved surface the middle hangs free and the antenna-to-metal distance is uneven.

  • On a plastic grip, there is no metal, so it will not read.

  • A metal face that is too narrow and blocked by other tools shortens range inside a cart drawer.

How others use similar tags

Aerospace manufacturers have embedded tiny ceramic labels in tool handle ends. A fixed reader on the tool cart reads the batch at once, so at end of shift they know immediately whether any tool was left inside the airframe.Similar tag application, not a test of this product

Full specifications

Size
Long side 25 mm, about 0.3× a credit card long side (85.6 mm)
Type
Anti metal ceramic label, Reusable
Suitable surfaces
Metal surfaces
Mounting
Peel off the liner and stick on a clean, dry surface

Read range depends on the reader, antenna, mounting surface and angle. Test on site first.

Bring the item you want to tag and test it

Using it for laptop audits or another item? Tell us the item, quantity and reader, and we will confirm whether this tag fits.

Key specifications at a glance

ModelW-2509
Frequency902~928
ApplicationUsed for metals. UHF RFID tags are widely used in logistics, retail inventory, and supply chain management due to their advantages of long-distance and fast identification, achieving efficient tracking and intelligent inventory of goods.
Size25*9*3mm
Product categoryUHF Tag Selector - Smart Classification

Compare UHF Tag Selector - Smart Classification models

W-2509 RFID Passive Tag and other models in the same WENSHING category — select a model to see its full details.

ProductModelFrequencyApplication
W-2509 RFID Passive TagW-2509902~928Used for metals. UHF RFID tags are widely used in logistics, retail inventory, and supply chain management due to their advantages of long-distance and fast identification, achieving efficient tracking and intelligent inventory of goods.
W‑3D OMNIW‑3D OMNI902~928Used for non-metallic materials.The application scope of UHF RFID tags is extremely broad, ranging from rapid inventory counting and outbound management in warehousing logistics to contactless checkout and inventory tracking in the retail industry
W-9508 RFID Passive TagW-9508902~928For non-metallic, glass, and outdoor weather-resistant applications. UHF RFID tags achieve contactless identification via radio waves, featuring long-range and multi-target reading capabilities.
W-7218 RFID Passive TagW-7218902~928Used for non-metallic materials. UHF RFID Tags achieve non-contact recognition through radio waves, with the advantages of remote reading and batch processing.
W-600 UHF RFID Passive Tag | 902–928MHz Lamp Label 97×15mmW-600902~928Used for non-metallic, glass, and outdoor weather resistance. UHF RFID The tag utilizes wireless radio frequency to achieve long-distance and batch identification.
W-0773 RFID Passive TagW-0773902~928Used for non-metallic materials. RFID The sticker label adopts high sensitivity UHF Chips and printable materials can be easily adhered to the surface of cardboard boxes, packaging bags, or logistics outer boxes
W-0765 RFID Passive TagW-0765902~928Used for non-metallic materials.Attach RFID electronic tags to barcode labels and attach them to the packaging trays of each project. In the tag, there are detailed information about the project, storage location, etc.
W-9654 RFID Passive TagW-9654902~928Used for non-metallic materials.UHF RFID tags are widely used in modern logistics, retail, and supply chain management due to their long-distance and large-scale reading characteristics, achieving efficient tracking of goods from warehouses to sales ends.
W-F54 RFID Passive TagW-F54902~928Used for non-metallic materials.UHF RFID tags are widely used in logistics, retail, manufacturing, and other fields to achieve product tracking, inventory management, and asset positioning.

Need help choosing? browse all UHF Tag Selector - Smart Classification products or contact our engineers for specifications, samples or a quotation.