中文
English
Home > Products > RFID Series> RFID Passive Tag > Small UHF RFID Sticker, 26x16 mm, 3 m Range | Crash Cart Drug Tray Checks

Small UHF RFID Sticker, 26x16 mm, 3 m Range | Crash Cart Drug Tray Checks

Model:
W-F54

A small UHF RFID sticker, just 26×16mm, small enough for little vials. On a hospital crash cart drug tray, tag each vial, put the whole tray in a reading box and read it once: any missing vial, or one close to expiry, is listed straight away. Shift handover no longer means checking vials one by one.

Its read range is short, about 1–3 m, so it reads only the tray inside the box and is unlikely to count drugs in the next cabinet. Jewelry hang tags and electronic component reels can be counted tray by tray the same way. On vials, keep it clear of the liquid level for the steadiest reads. The adhesive label is single use and cannot be reapplied once peeled.

1)Inlay

2) Disposable use

3) Reading distance: 1-3 m

4) Working temperature (℃): -25~+85

5) Frequency (MHz): 902~928

6) Size: 26 * 16 * 0.2 mm


Small UHF RFID Sticker, 902–928 MHz: 1–3 m read range, 26 × 16 × 0.2 mm, -25 to +85 °C operating temperature, single-use. A small RFID sticker for crash cart drug tray checks: tag every vial, put the whole tray in a reading box once, and the missing vial or the one about to expire is listed at once, so shift handover no longer means checking vials one by one.

  • crash cart drug tracking
  • drug count shift
  • drug inventory
  • crash cart tray RFID
  • small RFID label for vials
  • component reel RFID sticker
26 × 16 × 0.2 mmSize
approx. 1–3 mRead range, depends on reader and mounting surface
-25 to +85 °COperating temperature
902–928 MHzUHF band
InlayFor: Plastic and cartons
Single useNot reused once applied
Credit card54 × 85.6 mm26 mm16 mm
Drawn to the same scale: this tag next to a credit card (sizes in mm)

Where the Small UHF RFID Sticker is used

A small paper label for vials, jewelry tags and reels: count a whole tray at close range.

W-F54 Crash cart medication tray

Crash cart medication tray

One label per drug vial; the full tray goes in a reader box and any missing or soon-to-expire item is listed.

W-F54 Jewelry tag stock count

Jewelry tag stock count

Fixed on the jewelry tag; trays are counted on a reader in one go instead of hours of hand counting.

W-F54 SMT component reel

SMT component reel

On the side of component reels; storage racks and feeder stations read them to confirm the right part and keep stock current.

W-F54 Cosmetic sample sachets

Cosmetic sample sachets

On mini samples and travel-size packs; one read of the counter box shows what is left and which ones were taken.

Not suitable: With about 1~3 m range it is not for long-range portals, nor direct on metal or liquid.

In practice: counting and checking presence

  • Here or not

    Is every drug on the list in the crash cart tray?

    With this tag: put the whole tray in the reader box for one read; the vial not read is the one missing and needs restocking.

  • Count

    How many vials of this injection are left on the tray?

    With this tag: one tag per vial; the reader box shows how many were read, no counting vial by vial.Test vials filled with liquid first

  • Count

    Will the read also count drugs in the next cabinet?

    With this tag: range about 1~3 m is on the short side, so only the tray in the reader box is counted.

  • Count

    How many component reels are in this row?

    With this tag: stick on the reel edge and sweep the row up close; the number of reels read is listed directly.

Is this the right one? Compare it with other inlay label tags

All 4 models are drawn to the same scale; read-range bars run from 0 to 5 m.

W-F54

This page
Size
26 × 16 mm
Read range
1–3m
Temp.
-25 to +85 °C

Common uses: Hospital pharmacies: crash cart vials, Cosmetic brands: small pack labeling, Electronics stores: component reels

27 × 10
Size
27 × 10 mm
Read range
1–3m
Temp.
-25 to +85 °C

Common uses: Pharmaceuticals: small vial bodies, Cosmetic counters: tester trays, Electronics stores: parts bins

27 × 10
Size
27 × 10 mm
Read range
1–3m
Temp.
-25 to +85 °C

Common uses: Labeling the side of small bottles, Labs: reagent fridges, Electronic component stores: component boxes

22.5 × 22.5
Size
22.5 × 22.5 mm
Read range
3–4m
Temp.
-25 to +85 °C

Common uses: Small boxes, Pharmacies: drug boxes, Hypermarkets: small-pack items

Which uses fit? Use guide

W-F54: 26 × 16 mm, read range 1–3m, -25 to +85 °C.

  • Crash cart tray vials

    Best choice

    Hospital pharmacies

    Stick on the side of injection vials or drug box corners; put the tray in a reader box to check expiry and quantity

  • Whole-tray checks of emergency kits and drug boxes

    Best choice

    Hospital pharmacies, emergency

    Desktop reader box reads the whole tray; short range avoids the next cabinet

  • Small cosmetic packs

    Suitable

    Cosmetic brands

    Stick on the outer box side without covering brand print; with an outer box, label the box, not the bottle

  • Electronic component reels

    Suitable

    Electronics component stores

    Stick on the reel edge; sweep the row up close during counts

  • Directly on glass vials full of liquid

    Usable – test first

    Drug makers, hospital pharmacies

    Liquid affects reading; test with real vials first, and if unstable choose the liquid-tolerant W-7218

  • -80 °C frozen samples

    Not suitable

    Biotech labs

    Working temperature floor is -25 °C; not for ultra-low freezers or dry ice shipping, no matching model yet

How to mount it for reliable reads

W-F54 mounting steps
  1. Apply to a flat spot on the bottle side, away from the neck and strongly curved areas. Do not leave the edges lifting.

  2. On drug boxes, avoid the area directly in front of a liquid bottle, since water absorbs the signal.

  3. The small label has little area. Press the edges down after applying so gloves do not catch and lift them.

Can't read it? Three common reasons

  • Placed directly in front of a liquid-filled bottle, read range falls to a few tens of centimeters or the tag does not read.

  • A whole tray of small items placed tightly together shields the labels from each other.

  • On metal caps or foil packaging, the antenna detunes and the tag does not read.

How others use similar tags

UF Health Shands hospital pharmacy has managed crash-cart drug trays with RFID for three years. Small labels on vials and drug boxes let staff check expiry dates and counts for a whole tray placed in a tabletop read box.Similar tag application, not a test of this product

Full specifications

Size
Long side 26 mm, about 0.3× a credit card long side (85.6 mm)
Type
Inlay, Disposable use
Suitable surfaces
Plastic and cartons
Mounting
Peel off the liner and stick on a clean, dry surface

Read range depends on the reader, antenna, mounting surface and angle. Test on site first.

Bring the item you want to tag and test it

Using it for crash cart medication tray or another item? Tell us the item, quantity and reader, and we will confirm whether this tag fits.

Key specifications at a glance

ModelW-F54
Frequency902~928
ApplicationUsed for non-metallic materials.UHF RFID tags are widely used in logistics, retail, manufacturing, and other fields to achieve product tracking, inventory management, and asset positioning.
Size26*16*0.2mm
Product categoryUHF Tag Selector - Smart Classification

Compare UHF Tag Selector - Smart Classification models

W-F54 RFID Passive Tag and other models in the same WENSHING category — select a model to see its full details.

ProductModelFrequencyApplication
W-F54 RFID Passive TagW-F54902~928Used for non-metallic materials.UHF RFID tags are widely used in logistics, retail, manufacturing, and other fields to achieve product tracking, inventory management, and asset positioning.
W‑3D OMNIW‑3D OMNI902~928Used for non-metallic materials.The application scope of UHF RFID tags is extremely broad, ranging from rapid inventory counting and outbound management in warehousing logistics to contactless checkout and inventory tracking in the retail industry
W-9508 RFID Passive TagW-9508902~928For non-metallic, glass, and outdoor weather-resistant applications. UHF RFID tags achieve contactless identification via radio waves, featuring long-range and multi-target reading capabilities.
W-7218 RFID Passive TagW-7218902~928Used for non-metallic materials. UHF RFID Tags achieve non-contact recognition through radio waves, with the advantages of remote reading and batch processing.
W-600 UHF RFID Passive Tag | 902–928MHz Lamp Label 97×15mmW-600902~928Used for non-metallic, glass, and outdoor weather resistance. UHF RFID The tag utilizes wireless radio frequency to achieve long-distance and batch identification.
W-0773 RFID Passive TagW-0773902~928Used for non-metallic materials. RFID The sticker label adopts high sensitivity UHF Chips and printable materials can be easily adhered to the surface of cardboard boxes, packaging bags, or logistics outer boxes
W-0765 RFID Passive TagW-0765902~928Used for non-metallic materials.Attach RFID electronic tags to barcode labels and attach them to the packaging trays of each project. In the tag, there are detailed information about the project, storage location, etc.
W-9654 RFID Passive TagW-9654902~928Used for non-metallic materials.UHF RFID tags are widely used in modern logistics, retail, and supply chain management due to their long-distance and large-scale reading characteristics, achieving efficient tracking of goods from warehouses to sales ends.
W-RAB RFID Passive TagW-RAB902~928Used for non-metallic materials.UHF RFID tags are widely used in logistics warehousing management, retail inventory counting, and supply chain visualization due to their long-distance and fast batch identification characteristics.

Need help choosing? browse all UHF Tag Selector - Smart Classification products or contact our engineers for specifications, samples or a quotation.