中文
English
Home > Products > Security System> Access Controller > WS-DI830 RFID Access Controller

WS-DI830 RFID Access Controller

Model:
WS-DI830 RFID

WENSHING developed an access controller and inventory management system in November 2021 to integrate personnel access controller, item control, and item data collection.The WS-DI830 RFID Access Controller is different from traditional access controller management in that it does not need to use non-contact sensor access card.There is no need to swipe the card when entering and exiting after wearing an active card on the person,personnel wearing an active card do not need to swipe the card when entering and exiting, as long as they pass through the entrance and exit where the WS-DI830 RFID Access Controller is installed, the identity of the person entering and exiting can be automatically identified.

The WS-TAGP-915L3D RFID active tag installed on the article or pallet can automatically record relevant information as long as it enters and exits, and automatically enters and exits the warehouse.The sensing range can be adjusted by setting according to the size of the place of use and can be set up from 1 to 5 meters.      When used in the construction site safety management, the WS-TAGP-915L RFID full-prevention warning device can be automatically identified by fixing it to the helmet or clothes. Through the background, you can know the current location and floor of the construction personnel, or the construction site Install the WS-DI830 RFID Access Controller in the scope and set the protection hot zone in the system to restrict personnel from approaching the construction forbidden area. Once a person approaches the construction forbidden area, the WS-DI830 RFID Access Controller and WS-TAGP-915L will sound an alarm prompt personnel to stay away from danger area.



Application

● Construction  site work safety management

  Safety protection for petrochemical industry personnel

  RFID access control management

  Vehicle management

  Goods in and out

  Lifeguard

  Collection of fire brigade personnel

  Coal tunnel management

  Shopping cart management

  Medical equipment management

Features

  High-sensitivity RFID 900MHz two-way communication

  RFID access control sensing distance is adjustable 1~5 meters

  900MHz RFID active tag collection

  32-bit ARM architecture core

  Voice prompt

  Wireless communication relay function

  Built-in temperature sensor

  Built-in height sensor

  Built-in 4 relay outputs

  Dual antenna


Device Information

#

Specification

1

Wireless communication frequency

902~928MHz(WS-ATAG6325-9)

2

In and out sensing distance

0.5~5M(can be set up)

3

Wireless transfer distance

10KM(can be set up)

2

Temperature accuracy

1°C

3

Altitudeaccuracy

30CM

4

Dual antenna design

1 built-in antenna and 1 can external antenna

5

Number of control relays

4 relay control circuits

6

Operating Voltage

8~18V





Appearances

RFID|Wireless Modules|RF Module|Wireless VIDEO



Applications


main---en_03.jpg

main---en_06.jpg

main---en_07.jpg



Application


main---en_09.jpg