Model:WS-REMOTER SW3
Model:WS-RADAR SW-10G
Model:TWS-FS
Model:WS-UWBPDT
Model:RD232-H-RS232-925MRD232-H-RS485-925MRD232-H-USB-925MRD232-H-TTL-925M
Products
Application
About us
Contact us
Agent
RD-1000 can be commuted by WiFi, RS-485 and USB interfaces. UPS can be realized via portable chargers and thus providing instantaneous protection from input power interruptions. Users can extend controlling device by RS-485 for product’s output. Supporting DC 12~24V or AC 100~220V, enabling you to apply seamlessly without changing the interior design. RD-1000 adopts advanced ARM 32byte design, allowing computers to control high-speed reaction. It has 10 relays, 10 optical coupled isolators, high voltage/ ESD resistance, USB 5V power supply, and is exchangeable between wired and wireless communication. RD-1000 can be applied widely in: Remote access control, timer access locks, solenoid valve, wireless control motors, water pumps, parking lot fans, light control, wireless AVG control, emergency broadcast systems, data collecting systems, etc.
INTERFACE
Specification
APPEARANCE
External Appearance
ACCESSORIES
Model Description
型號
頻率
功能
WS-RD1000-R9
900MHz
*USB *RS-485 *RF通訊
WS-RD1000-R4
433MHz
WS-RD1000-L9
*USB *RS-485 *LoRa通訊
WS-RD1000-WiFi
2.4GHz
*USB *RS-485 *WiFi通訊
SPECIFICATION
Technical specifications
Frequency: 433MHz、925MHz
Interface: RS-485、USB (customize to WiFi)
Output rate: 0.5W (customize to 2W)
Consumption Current: 36mA (minimum consumption without connected)
Power supply: USB 5V
10 relays, 10 optically coupled isolators, strong ability to resistance high voltage ESD.
Adopts advanced Level ARM 32-bit single chip microcontroller design. Fast response.
Users can use RS-485, USB, ISM433MHz or 925MHz, WiFi TCP/IP connections, to extend and control the peripherals equipment or directly control RD-1000.
It can achieve the UPS power supplying by portable charger. No worry lose control when the power has been cut-off.
It supports wireless signal receiving strength displaying, making onsite installation easier.
LED display.
It supports 10 I/O input AC signal to detecting frequency, in order to understand if the generator is working properly.
Input I/O can DC 12~24V or AC 100~220V, without any change.
It can be directly controlled by PC or Raspberry PI, no need to process power.
It can be controlled by DIP switch and PC.
Input and Output optical coupler interface to prevent high voltage surge.
To prevent high voltage surge, both of input and output built-in the optical coupler.
Easy transformation between wired and wireless communications, resolution to wiring problems.