正在加载中

低功率雙向高頻模組

The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 250 Kbps. The communication range can be increased by enabling a Forward Error Correction option, which is integrated in the modem. TRW-811S provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on-radio.The main operating parameters and the 64-byte transmit/receive FIFOs of TRW-811S can be controlled via an SPI interface. In a typical system, the TRW-811S will be used together with a microcontroller and a few additional passive components.

  • 型號: TRW-811S
  • Data Sheet: download
  • 頻率: 300~928MHz
  • 示範電路圖: download

 

APPEARANCE

產品外觀


RFID|Wireless Modules|RF Module|Wireless VIDEO


RFID|Wireless Modules|RF Module|Wireless VIDEO




FEATURES

產品特色



图片关键词                图片关键词



图片关键词              图片关键词


图片关键词              图片关键词


图片关键词              RFID|Wireless Modules|RF Module|Wireless VIDEO


图片关键词               图片关键词



图片关键词         图片关键词




图片关键词       图片关键词


图片关键词        图片关键词





SPECIFICATION

產品規格



  • Small size

  • Separate 64-byte RX and TX data FIFOs

  • Efficient SPI interface: All registers can be programmed with one "burst" transfer

  • Programmable output power up to +10dBm

  • High sensitivity (-111 dBm at 1.2 Kbps, 1% packet error rate)



ParameterMinMaxUnitCondition/Note
Supply Voltage2.73.3V
Voltage on Any Digital Pin-0.3VDD+0.3V
Input RF Level
+10dBm
Storage Temperature Range-50150
ESD
<50VAccording to JEDEC STD 22, method A114, Human Body Model


ParameterMinTypeMaxUnitCondition/Note
Frequency Range300
928MHz
Data Rate1.2
250Kbps
Power Down Modes
400
nAVoltage regulator to digital part off, register values retained (sleep state)
Current Consumption, RX
16
mA
Current Consumption, TX
30
mATransmit mode, +10dBm output power
Receiver Sensitivity1.2K data rate -111dBm
Transmit Output Power

+10dBmTransmit mode