868Mz 902MHz~928MHz Remote Controls 16 I/O
RD-800
922~928MHz
Home >Wireless Remote Controller >Wireless Controller 16 Loop >868Mz 902MHz~928MHz Remote Controls 16 I/O
Model : RD-800
868Mz 902MHz~928MHz Remote Controls 16 I/O

RD-800 can be used as industrial controls and provide wireless control interface. RD-800 offer 8 sets of control signal input and 8 sets of equipment control output. It´s only needed several simple wiring steps and then change to a wireless control environment. It can effectively reduce the cost of connecting equipment.

Product Block Diagram

Chart 1 RD-800 Product Block Diagram

RD-800 has the complete RF receiving and transmitting circuit and interface, Chart 1 is the function block diagram of RD-800, the main components are as follows, DSP processor, circuit of RF frequency, memory, power and system connector, all can connect outer antenna. When through system connector is able to link 8 sets control signal input port and 8 sets equipment control output port.

In Chart 1, inside the red line frame is the each component part of the main board of RD-800. The outside of red line is outer interface. The narrow band of RD-800 main board has finished all the function of wireless control. Include RF specification and the code of RF data, regulation frequency indication. Additionally, the main board also include: 8 sets control signal input port and 8 sets equipment control output port. LED light instruction. The follows we will separate to introduce each part function of main board and outer interface.

Introduction of Each Function

  • DSP Processor
    DSP processor finished all signals handle function of RD-800, including receiving and transmitting RF data, LED light instruction, and judgment of the button.
  • Circuit of radio frequency
    The circuit of radio frequency offers the pass way of receiving and transmitting of 922~928MHz. Including receiving circuit, transmitting circuit, frequency compose the circuit.
  • Memory
    The memory is mainly used in storing the present working frequency and RF transmitting speed.
  • Circuit of the power
    Circuit of the power offered AC 24~28V or DC 20~28V input in power supply.
Indication Position Item Description
1 AC/DC Input Outer power input
2 Controlled Signal Input Provide 8 sets signal input
3 Device Controlled Output Provide 8 sets signal output
4 Antenna The position for antenna insert.
5 Link key equipment Link equipment and self-test function keys
6 Track Put in the position of aluminum track

8 PIN In and 8 PIN Out, simple terminal PIN In, may penetrate the dip switch to control, also may penetrate the PC to control. When it´s no signal, it demonstrates that the input -output has the photocoupler to be the interface, and prevents the wave form of applied voltage.

RD-800 is a module of 8 points PIN In and PIN Out, including transceiver and receiver module TRW-V4B (922~928MHz),greatly reduce consumer´s operational complexity, 8in8out I/O not only penetrates the Terminal to finish wiring easily, but also can permeate the PC control, proceed a pair of many communications.

Characteristic

  • 8 PIN in and 8 PIN out.
  • Simple terminal PIN in.
  • May penetrate the switch to control
  • Possess showing if have signal´s function.
  • It demonstrates the input -output has the photocoupler to be the interface, and prevents the wave form of applied voltage.

Application

  • Automotive Industry
  • Elevator
  • Control of remote crane

    Feature

  • For duplex wireless RF transceiver product
  • Wireless 8 in-out control box
  • 8 sets of equipment input control
  • 8 sets of equipment output control
  • Effective reducing the connecting cost of the equipment

Specification

  • Frequency : 922~928MHz
  • Distance : 150M (Straight-line distance under open space)
  • Number of Channels : 16
  • Consumption Current : 36mA (MIN disconnect)

I have a question:

Name:     
Title:         
E-mail:     
Address: 
Q&A content:
Public message Suggestion for WENSHING not for public